1. Find out the cause of the leakage of the heating pipe. If you find that there is water leakage in the floor heating pipe, please close the heating valve in time, then close the valve that controls the water leakage in the water separator, and then open the air release valve of the water separator to eliminate the pressure inside, so as not to cause too much loss. The heater pipe leaks. We need to find out the cause of the water leak as soon as possible. It is the heater pipe that is broken or the connector of the heater pipe is not perfect.

2. Generally, the iron pipe leaks water due to sand holes that occur for a long time. This is a common situation, and it is easy to solve it. Use a section of the inner tube of a bicycle to tightly tighten it at the place where the water leaks. Wrap the sand holes one button at a time, and then use iron wire to tighten them. The sand holes will rust away automatically after a long time.

3. The sand hole of the heating branch pipe leaks. When this happens, wrap a towel or rag around the tube, leave a section of it in the basin, and drain the water into the basin. If you have a bicycle inner tube at home, you can cut it into a strip of 1cm wide (more than 50cm is appropriate), swing the inner tube strip away from the sand hole 3cm, and wrap it on the pipe one button at a time until it has wrapped the sand hole 3cm.